Description
Welding Position: All positions
Type of Current: DCEP
GAS: C1 (EN ISO 14175)
Stock Code: AS01706-W
Features & Applications: A multi-purpose all positional rutile cored wire for use with CO2 shielding gas It is widely used in mild steel and 490 MPa grade steel.
CLASSIFICATIONS Weld Metal:
SFA/AWS A5.20 E71T-1C
SFA/AWS A5.36 E71T1-C1A0-CS1
EN ISO 17632-A T422 P C11 H10
Chemical Composition of Deposited Metal (%)
C |
Mn |
Si |
S |
P |
|
Standard |
≤0.12 |
≤1.75 |
≤0.90 |
≤0.03 |
≤0.03 |
Typical |
0.055 |
1.35 |
0.4 |
0.009 |
0.018 |
Mechanical Properties of Deposited Metal (AW)
| Tensile Strength Rm (Mpa) |
Elongation A4 (%) |
Impact Value (J) | Shield Gas CO2 |
|||
| -20°C | -30°C | |||||
| Standard | ≥ | 490-660 | ≥22 | – | ≥27 | purity ≥ 99.98% |
| Typical | 535 | 32 | 120 | 110 | ||
Diffusible hydrogen in deposited metal: ≥10ml/100g (mercury process)
X-ray radiographic inspection: Grade I
Size & Recommended Current (DC*)
| Diameter (mm) | 1 | 1.2 | 1.4 | 1.6 | |
| Current (A) | F | 100-280 | 120-300 | 150-380 | 180-430 |
| HF | 100-280 | 120-280 | 150-320 | 180-380 | |
| V.OH | 80-260 | 120-260 | 150-270 | 180-280 | |
| H | 100-260 | 120-280 | 150-320 | 180-330 | |
| VD | 100-260 | 200-280 | 220-300 | 250-300 | |
Notice: 1. The flow rate of shield gas should be within 20L – 25L/min in welding.
2. The wire extension shoud be 15mm-25mm.
3. The surfaces to be welded must be clean from impurities, oil contamination, rust, moisture and so on.
4. The welding conditions mentioned acts as a reference only and it is recommended to do a welding
procedure qualification according to the project before putting it into formal welding.
This product has been approved by CCS. ABS. DNV • GL. LR. BV. NK. KR. RINA, RS for 3YSH5. This certifies the compliance standards of this product.